Fiberglass braid for boiler door : D.7/8mm – L.5M stock limité

Fiberglass braid for boiler door GEB – 832490

• D.7/8mm – L.5M

Features :
Glass fibre knitted braid for thermal sealing :

• Door seals for inserts and boilers
• Insulation
• Mould gaskets

Implementation:

Preparation:

• The surfaces must be clean.

Instructions for use :

• Cut the necessary amount of braid with a blade.
• Apply a bead of refractory glue to the support. It is preferable to place the braid in its housing by compressing it rather than stretching it. It is imperative to respect the recommended diameters (width of the groove to the nominal braid diameter).
• Apply the braid firmly to the adhesive bead and allow to dry (about 2 hours in this case with the Collafeu before gradually increasing the temperature).

Product benefits:

• Extendable, suitable for several diameters
• Flexible, it is easy to apply
• Clean and easy cutting

Tips:

• The shape of the knitted sleeve (tube) allows the male and female ends of the braid to form an imprint, so that the two ends can be joined together perfectly to give a good seal

Storage:

• At 20°C, the shelf life of the product in its original closed packaging is over 10 years